Reset Ipv6 Neighbors - H3C s3100 series Command Manual

View
User view
Parameters
ipv6-address: Clears the ND snooping entries of the specified IPv6 address.
vlan vlan-id: Clears the ND snooping entries of the specified VLAN. The VLAN ID ranges 1 to 4094.
Description
Use the reset ipv6 nd snooping command to clear ND snooping entries.
If no parameter is specified, this command clears all ND snooping entries.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Clear all ND snooping entries on VLAN 1.
<Sysname> reset ipv6 nd snooping vlan 1

reset ipv6 neighbors

Syntax
reset ipv6 neighbors [ all | dynamic | interface interface-type interface-number | static ]
View
User view
Parameters
all: Clears the static and dynamic neighbor information on all interfaces.
dynamic: Clears the dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears all neighbor information of a specified interface.
static: Clears the static neighbor information on all interfaces.
Description
Use the reset ipv6 neighbors command to clear IPv6 neighbor information.
You can use the display ipv6 neighbors command to display the current IPv6 neighbor information.
Examples
# Clear all neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all
# Clear dynamic neighbor information on all interfaces.
1-43