Reset Session Table Ipv6 - H3C MSR Series Command Reference Manual

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears information for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
information for all cards. (Distributed devices in IRF mode.)
source-ip source-ip: Specifies a source IPv4 address. The source-ip argument specifies the source
IPv4 address of a unicast session from the initiator to the responder.
destination-ip destination-ip: Specifies a destination IPv4 address. The destination-ip argument
specifies the destination IPv4 address of a unicast session from the initiator to the responder.
protocol { dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv4 transport layer
protocol, including DCCP, ICMP, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a unicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you want to clear IPv4 unicast session entries on the
public network, do not specify this option.
Usage guidelines
If you do not specify any parameters, this command clears all IPv4 unicast session entries on the
public network.
Examples
# Clear all IPv4 unicast session entries.
<Sysname> reset session table ipv4
# Clear the IPv4 unicast session entries with the source IP address of 10.10.10.10.
<Sysname> reset session table ipv4 source-ip 10.10.10.10
Related commands
display session table ipv4

reset session table ipv6

Use reset session table ipv6 to clear information about IPv6 unicast session entries that match the
specified criteria.
Syntax
Centralized devices in standalone mode:
reset session table ipv6 [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol { dccp |
icmpv6 | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port
destination-port ] [ vpn-instance vpn-instance-name ]
Distributed devices in standalone mode/centralized devices in IRF mode:
reset session table ipv6 [ slot slot-number ] [ source-ip source-ip ] [ destination-ip destination-ip ]
[ protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ]
[ destination-port destination-port ] [ vpn-instance vpn-instance-name ]
Distributed devices in IRF mode:
904