Display Ip Socket - H3C s3600 series Command Manual

Output:

display ip socket

Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameters
socktype sock-type: Displays the socket information of this type. The sock type is in the range 1 to 3,
corresponding to TCP, UDP and raw IP respectively.
task-id: ID of a task, with the value ranging from 1 to 100.
socket-id: ID of a socket, with the value ranging from 0 to 3072.
Description
Use the display ip socket command to display socket information.
Field
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information request
mask requests
mask replies
time exceeded
echo
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information reply
mask requests
mask replies
time exceeded
Number of received destination unreachable
packets
Number of received source quench packets
Number of received redirection packets
Number of received replies
Number of received parameter problem packets
Number of received time stamp packets
Number of received information request packets
Number of received mask requests
Number of received mask replies
Number of received expiration packets
Number of sent echo packets
Number of sent destination unreachable packets
Number of sent source quench packets
Number of sent redirection packets
Number of sent replies
Number of sent parameter problem packets
Number of sent time stamp packets
Number of sent information reply packets
Number of sent mask requests
Number of sent mask replies
Number of sent expiration packets
2-7
Description