Port Binding Commands; Am User-Bind - H3C S3100 Series Command Manual

2

Port Binding Commands

Currently, only the S3100-EI series support port binding.
Port Binding Commands

am user-bind

Syntax
In system view:
am user-bind mac-addr mac-address { ip-addr ip-address
interface-type interface-number ]
undo am user-bind mac-addr mac-address { ip-addr ip-address | ipv6 ipv6-address } [ interface
interface-type interface-number ]
In Ethernet port view:
am user-bind { mac-addr mac-address [ ip-addr ip-address | ipv6 ipv6-address ] | ip-addr ip-address
| ipv6 ipv6-address }
undo am user-bind { mac-addr mac-address [ ip-addr ip-address | ipv6 ipv6-address ] | ip-addr
ip-address | ipv6 ipv6-address }
View
System view, Ethernet port view
Parameters
interface interface-type interface-number: Specify the port to be bound. The interface-type
interface-number arguments specify the port type and port number.
mac-addr mac-address: Specify the MAC address to be bound. The mac-address argument is in the
form of H-H-H.
ip-addr ip-address: Specify the IP address to be bound.
ipv6 ipv6-address: Specify the IPv6 address to be bound.
Description
Use the am user-bind command to bind the MAC address and IP address of a user to a specified port.
Use the undo am user-bind command to cancel the binding.
| ipv6 ipv6-address } [ interface
2-1