Enabling Netstream; Entering Netstream Aggregation View - H3C S7500 Series Operation Manual

Operation Manual – NAT, Netstream, Policy Routing
H3C S7500 Series Ethernet Switches

Enabling Netstream

Entering Netstream Aggregation View

Enabling the Corresponding Aggregation Mode
Configuring the Address Information for Netstream Export Packets
Configuring the Version and AS Option for Netstream Export
Packets
Configuring the DSCP Value for Netstream Export Packets
Configuring Netstream Entry Aging Time
Configuring the Ways to Update the Template for Version 9
Netstream Packets
Note:
Currently the Netstream and the L3+ traffic accounting functions cannot be enabled
simultaneously.
2.2.2 Enabling Netstream
Follow these steps to enable Netstream:
To do...
Enter system view
Enable Netstream
Caution:
Netstream configuration only applies to the permit rules in the ACL.
2.2.3 Entering Netstream Aggregation View
Use the ip netstream aggregation command to enter a Netstream aggregation view.
Task
Use the command...
system-view
ip netstream inbound source
srcslot-number to dstslot-number [ acl
acl-number ]
Or
ip netstream outbound source
srcslot-number to dstslot-number
2-3
Chapter 2 Netstream Configuration
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
—
Required
By default,
Netstream is
disabled.