Configuring The Netstream Data Export; Configuring The Netstream Traditional Data Export; Configuring The Netstream Aggregation Data Export - H3C SR6600-X Configuration Manual

Step
3. (Optional.) Configure
forced aging.

Configuring the NetStream data export

Configuring the NetStream traditional data export

Step
1. Enter system view.
2. Specify a destination host
for NetStream traditional
data export.
3. (Optional.) Specify the
source interface for
NetStream data packets
sent to NetStream servers.
4. (Optional.) Limit the data
export rate.

Configuring the NetStream aggregation data export

NetStream aggregation is implemented by software.
Configuration restrictions and guidelines
When you configure the NetStream aggregation data export, follow these restrictions and guidelines:
Configurations in NetStream aggregation mode view apply only to the NetStream aggregation
•
data export, Configurations in system view apply to the NetStream traditional data export. If
configurations in NetStream aggregation mode view are not provided, the configurations in system
view apply to the NetStream aggregation data export.
• If the version 5 format is configured to export NetStream data, NetStream aggregation data export
uses the version 8 format.
Configuration procedure
To configure the NetStream aggregation data export:
Step
1. Enter system view.
Command
a. Exit to user view:
quit
b. Age out NetStream entries:
reset ip netstream statistics
Command
system-view
ip netstream export host
ip-address udp-port [ vpn-instance
vpn-instance-name ]
ip netstream export source
interface interface-type
interface-number
ip netstream export rate rate
Command
system-view
217
Remarks
N/A
Remarks
N/A
By default, no destination host is
specified. No NetStream traditional
data is exported.
By default, no source interface is
specified for NetStream data packets.
The packets take the primary IP address
of the output interface as the source IP
address.
By default, the data export rate is not
limited.
Remarks
N/A