Table of Contents
Advertisement
12.2-40
Integration Volume
b. Listen to the complete company greeting. Press
NO
c.
From phone A, call out and back in on a trunk that auto-terminates to the Octel 200/300.
When the Octel 200/300 answers, let the system time out; do not enter any digits.
d. Does the Octel 200/300 transfer the call to the intercept position that was configured for this
trunk group?
NO
e.
If different intercept positions are defined for each trunk group, repeat steps a. through d. for
each group.
12A. MESSAGE WAITING FOR SYSTEMS USING THE OCTEL 200/300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems using MWI.
a.
b. From phone A, call out and back in on a trunk auto-terminated to the Octel 200/300.
c.
d. Call the extension number of phone B. Does the Octel 200/300 respond with "Extension
e.
f.
g. From phone B, call the Octel 200/300 and enter mailbox B. The Octel 200/300 should
h. Listen to the test message.
Octel 200/300
S.4.1
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
Take phone B off-hook so that it appears busy.
Does the Octel 200/300 answer properly?
NO
Determine the cause, and correct the problem before continuing.
'
.
You may prefer to use the Quick Message feature to leave a message for phone B
instead of following the instructions in step d. and e.
EXT-B is busy. Please leave a message at the tone, enter another extension number, or press
zero for assistance" ?
Leave a test message for phone B.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length.
Leave a test message approximately 15−20 seconds in length to ensure a valid
message. The mailbox for phone B must be entered in the Octel 200/300 USER Table
or the Octel 200/300 does not offer to take a message.
Does the Octel 200/300 light the message waiting indicator on phone B?
.
It may take several seconds for the indicator to turn ON.
NO
Determine the cause, and correct the problem before continuing.
'
respond with "You have one message. Ready."
. Do you reach the correct intercept position?
0
PB60019-01
Advertisement
Chapters
Table of Contents
