Avaya Octel 200 Installation And Maintenance Manual page 187

PB60019-01
PEG NAME
1 IC ERROR
2 WRONG CNT
3 WDT ERROR
4 MSGW RETRY
5 TIMER RE-ENTRY
LINK-DEPENDENT PEGS. The following link dependent pegs are
listed by the LIST INTEGRATION command. Each link has its own
pegs.
PEG NAME
1 BAD CALL
2 CRC ERROR
3 NO DISPLAY
4 INTERNAL ERROR
5 RESENT CMDS
6 PRESS OUT ERROR
7 ANSWER ERROR
DEFINITY G3 Adaptive Integration
DESCRIPTION
Number of times the ATTIC
timed out waiting for the Octel
200/300 to process a reply.
Number of times the ATTIC
processor received an invalid
interrupt.
Number of times the ATTIC
watchdog timer timed out.
Number of times the ATTIC had
to retry a message waiting lamp
attempt.
The ATTIC 10 ms timer was
interrupted by itself.
DESCRIPTION
Number of times the ATTIC called
and the display indicated it reached a
different extension.
Number of packets received from the
PBX that did not have a valid CRC.
The packet was ignored and not
acknowledged.
Number of times that the ATTIC
called the Octel 200/300 and the
display was blank.
The ATTIC incremented one of its
internal error pegs.
Number of commands that the
ATTIC had to resend because the
PBX did not acknowledge the
command.
Number of times the ATTIC tried to
select the outgoing line and the Red
LED did not light.
Number of times the ATTIC tried to
answer an incoming call and could
not.
Octel 200/300
7.1-49
S.4.1