Avaya Octel 200 Installation And Maintenance Manual page 895

1. The message server answered an incoming call and transferred it to another extension.
2. The PBX has responded to the attempt to call extension 60105 with a Clear Request Message and a
Cause of Busy. The message server then clears the outcall port.
3. The caller decided not to leave a message and hung up.
Example 3
messages to clear the message-waiting indicator.
dpnss>
dpnss> LI TRA
Trace not frozen.
Trace Queue cleared.
28111718.94 30 CCS Layer 3 RX
28111719.14 30 CCS Layer 4 TX
Caller: 79060101
28111719.24 30 CCS Layer 3 TX
28111719.35 30 CCS Layer 3 TX
28111725.98 Ca IC Msg from CPU
28111726.03 05 CCS Layer 4 RX
28111726.14 Dc CCS Layer 3 TX
28111726.64 Dc CCS Layer 3 RX
28111726.84 05 CCS Layer 4 TX
28111726.86 Dc CCS Layer 3 TX
28111733.35 30 CCS Layer 3 TX
28111733.94 30 CCS Layer 3 RX
DPNSS Supplementary Information String Identifiers (SIS)
SIS strings in DPNSS message packets begin with a * and end with a #. If there are any parameters
associated with a particular SIS identifier, the parameters are separated from the identifier and each other
by an *. For example, the calling party number will appear in an Originating Line ID (OLI) SIS as
*50*3701234#. The supplementary information string identifiers that you can use to identify the PBX
activities are as follows:
PB60019-01
.
The third DPNSS trace example shows extension 60101 logging in and the subsequent
Clear Trace Queue and continue? (y/n): y
Will print new events as they occur...
{11B = Call Back When Free − Free Notification}
{12B = Call Back When Free − Call Set−Up(Immediate)}
{13B = Call Back When Free − Cancel}
{14B = Ring Out}
{15B = Call Back Complete}
{16B = Call Back When Free − Call Set−Up(Delayed)}
{17B = Call Back When Next Used−Request}
{18B = Class Of Service}
{19 = Loop Avoidance}
{20 = Executive Intrusion − Prior Validation}
{21 = Executive Intrusion − Request}
ISRC *1#*50*79060101#*18*27*31*31#*19*Z#4000
INCALLChan:30 Type:01 Fwrd:00
NAM *50*4000#*1#*58*AO#
CCM
ISDN MWI Type:0E Len:52 Port:05 Seq:0B
MWILamp On/Off:0, Start ID: 60101,
ISRC *50*4350#*1#*58B*AN*0#60101
CI/RM Cause:ACK
MWI ACK 0001 0001 0014 BDBD
CI/RM Cause:ACK
CI/RM Cause:CT
CI/RM Cause:CT
DPNSS Integration 15-19
Octel 200/300 S.4.1