Avaya Octel 200 Installation And Maintenance Manual page 229

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

3. ANALOG LINE EXTENSION NUMBER CHECK
This test verifies that the PBX extension numbers assigned to the Octel 200/300 ports match the
corresponding extension numbers in the Octel 200/300 SLOTS Table.
.
a.
b. Connect the modular adapter to the 25-pair cable associated with slot 1.
c.
d. Connect the digital phone to one of the digital links.
e.
f.
g. Check that the name on the digital display is the name programmed for phone A.
h. Hang up phone A.
i.
4. DIGITAL LINE EXTENSION NUMBER VERIFICATION
This test verifies that the PBX extension numbers assigned to the Octel 200/300 match the
corresponding extensions.
.
a.
b. Connect the digital phone to the jack position of the adapter that corresponds to the
c.
d. Is the green lamp associated with Line 1 of the digital phone the digital phone flashing?
e.
PB60019-01
Disable RNA coverage for this test.
Label one single line telephone phone A.
Connect phone A to the first jack position of the modular adapter.
From the digital phone, enter the extension number of phone A.
Does phone A ring?
YES
Answer the call, verify the circuit quality.
'
NO
If the quality is bad, determine the cause and correct the problem before
'
continuing.
Connect phone A to the RJ11 jack position of the modular adapter of the next Octel 200/300
port extension and repeat steps f. through i. until every Octel 200/300 port extension has been
tested.
Obtain a hard copy of the SLOTS Table information pertaining to those slots configured for
ATTIC integration.
Connect the 356A module adapter to the 25-pair cable associated with the first ATTIC slot.
Integration Unit 1, Link 1 of ATTIC.
From phone A, call the extension for Link 1. Does Link 1 ring?
NO
Check the PBX configuration for the extension associated with the phone
'
number. Refer to Figure 7.2-4.
NO
Check the button assignments. The call appearance should be assigned 1 − 10.
'
Refer to Figure 7.2-4.
Repeat steps a. through d. for all links.
AT&T System 75/Definity G1 Adaptive Integration
7.2-33
Octel 200/300
S.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents