Table of Contents
Advertisement
j.
Hang up phone B. Is the message waiting indicator turned OFF?
NO
12B. MESSAGE WAITING FOR SYSTEMS NOT USING THE Octel 200/300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting notification for systems not using the
SX-2000 feature access codes to control message waiting indicators.
a.
Set phone B to forward to the Octel 200/300 on a busy condition by entering the feature access
code for Call Forwarding - Busy followed by the Octel 200/300 access number. After setting
forwarding for phone B, leave phone B off-hook so that it appears busy.
b. From phone A, call out and back in on a trunk that auto-terminates to the Octel 200/300.
c.
Does the Octel 200/300 answer properly?
NO
d. Call the extension number of phone B. After the duration specified by the PBX System Option
for Call Forwarding Don't Answer Time-out, the Octel 200/300 should respond, "Extension
EXT-B is in use. Please leave a message at the tone, enter another extension number, or press
zero for assistance. . ."
e.
Leave a test message for phone B. While recording the message, put phone B back on-hook.
f.
The Octel 200/300 should now initiate a message waiting notification call to phone B. Does the
Octel 200/300 call the extension associated with phone B?
NO
g. From phone B, call the Octel 200/300 and enter the mailbox number of mailbox B. the Octel
200/300 should respond with "EXT-B has one message. Ready. . ."
h. Listen to the test message. Does the message sound clear?
NO
i.
Press
with "One message will be erased. . . ?" Press
respond with "Good-bye. . . ?"
NO
j.
Hang up phone B.
PB60019-01
Determine the cause and correct the problem before continuing.
'
.
It may take several seconds for the indicator to turn OFF.
Determine the cause and correct the problem before continuing.
'
.
If the Octel 200/300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the instructions of
step d. and e.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
to erase the message. Press
3
Determine the cause and correct the problem before continuing.
'
Mitel SX-2000 Adaptive Integration
to exit the mailbox. Does the Octel 200/300 respond
9
to exit the mailbox. Does the Octel 200/300
9
10.3-43
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
