Avaya Octel 200 Installation And Maintenance Manual page 16

Chapter 8
ROLM CBX, ROLM 9751,
Models 30/80
Chapter 9
Cortelco Millennium
Chapter 10
Mitel SX-100 Digital,
SX-100/SX-200 Analog,
and SX-2000
Chapter 11
Meridian 1
Chapter 12
Definity G3,
AT&T System 75
and System 85 with APIC
Chapter 13
Northern Telecom M1
with NPIC
Chapter 14
MD110 Adaptive
Integration
Chapter 15
DPNSS Integration
Chapter 16
ISDN Integration
Chapter 17
QSIG Integration
Octel 200/300 S.4.1
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers and the ROLM CBX and the ROLM
9751, Model 30 and Model 80. This connection is provided by Octel's
ROLM Interface Card (RIC).
This chapter discusses the Adaptive Integration connection between the
Octel 200/300 message servers and the Cortelco Millennium. This is an
RS-232C connection.
This chapter discuses the Adaptive Integration connection between the
Octel 200/300 message servers and the Mitel SX-100 Digital,
SX-100/SX-200 Analog, and the SX-2000. This connection is provided
by Octel's Mitel Interface Card (MIC).
This chapter discuses the Adaptive Integration connection between the
Octel 200/300 message servers and the Meridian 1. This connection is
provided by Octel's Serial Interface Card (SIC8).
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers and the DEFINITY G3, AT&T System
75, and AT&T System 85 when the APIC card is installed.
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers and the Northern Telecom Meridian 1
when the NPIC card is installed.
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers and the MD110 through an RS-232
serial data link.
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers with DPNSS when the DTIC is installed.
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers with ISDN when the DTIC is installed.
This chapter discusses the Adaptive Integration connection between
Octel 200/300 message servers with QSIG when the DTIC is installed.
PB60019-01