Avaya Octel 200 Installation And Maintenance Manual page 423

8.2.8 INSTALLATION CHECKLIST
This section offers a checklist of issues relating to Octel 200/300 and to the ROLM Model 30/80 CBX.
The list is presented in the order in which the installation process should be followed. For details
regarding any topic, refer to the sections of this chapter.
Pre-Installation
Item Description
1. List the database. Highlight areas where changes are
required.
2. Make note of the following definitions for each port
Number of ports
-
Port extension number
-
3. If different company greetings will be used, enter the
access code for each route into the
able. Obtain access code numbers from ROLM
T
vendor.
4. Set the rings before no answer to be one less than the
ring cycle set forwarding in the ROLM Model 30/80
CBX.
Item Description
1. List ROLM Model 30/80 CBX database and highlight areas where changes
are required.
2. Verify that the S/W release is 9006.1 KV19 for the ROLM Model 30/80 CBX,
Model 30 or Model 80 system.
3. Verify that the ROLM Model 30/80 CBX has the required ROLM link
channels available.
PB60019-01
Table 8.2-2 Octel 200/300 Requirements
TRUNK GROUP
Table 8.2-3 ROLM Requirements
ROLM 9751 Model 30/80 Adaptive Integration
Command Complete
.L ALL
.L SLOT
.A TRUNK
.M INFO
Index #7
Complete
8.2-33
Octel 200/300 S.4.1