Avaya Octel 200 Installation And Maintenance Manual page 484

10.1-30 Integration Volume
7. MESSAGE WAITING INDICATOR TEST (MWI ONLY)
7A. MWI Test With Superset 4 Sub-Attendant Feature
This test verifies that a message waiting indicator can be set and cleared using the Superset 4
sub-attendant feature.
a. Connect the Superset 4 to the MIC port used for MWI and wait for the PBX to initialize the
Superset 4.
b. Go off-hook on the Superset 4 and enter the extension number of phone B. Does phone B ring?
NO
c. Once phone B starts ringing, does softkey 4 of the Superset have the SEND MSG prompt?
NO
Possible causes may be that the Superset 4 is not configured as a sub-attendant (COS Option
606) or that phone B is not configured for lamp message waiting (COS Option 232).
d. Press the SEND MSG softkey. Does the Superset 4 return dial tone? Is the Phone B message
waiting indicator ON?
NO
e. From the Superset 4, enter the extension number of phone B again. Once phone B is ringing,
does softkey 4 of the Superset have the MSG prompt?
NO
f. Press the MSG softkey. Does the Superset 4 return dial tone? Is the Phone B message waiting
indicator OFF?
NO
g. Hang up the Superset 4. Using phone A, call the Superset 4. Does the PBX return reorder tone?
If not, verify that the COS for MWI has Option 235, ORIGINATE ONLY, enabled. Correct the
problem before continuing.
h. Hang up phone A.
7B. MWI Test With COV Voice Mail Feature
This test verifies that a message waiting indicator can be set and cleared using the Superset 4
COV Voice Mail feature.
a. Connect the Superset 4 to the MIC port used for MWI and wait for the PBX to initialize the
Superset 4.
b. Press the selected feature button on the Superset 4. The display should read as follows:
DIAL FEATURE NO.
NO
c. Press
NO
Octel 200/300 S.4.1
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
on the keypad. Does the display clear?
4
Determine the cause and correct the problem before continuing.
'
PB60019-01