Avaya Octel 200 Installation And Maintenance Manual page 704

12.1-42 Integration Volume
12B. MESSAGE WAITING FOR SYSTEMS NOT USING THE OCTEL 200/300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting notification for systems not using the
message waiting indicators.
.
a.
b. From phone A, call the Octel 200/300.
c.
d. Call the extension number of phone B. The Octel 200/300 should respond, "Extension EXTB
e.
f.
g. Press
h. Press
i.
j.
Octel 200/300 S.4.1
Attribute 9 should not be configured for the mailbox associated with EXTB.
Make phone B appear busy by taking it off-hook.
Does the Octel 200/300 answer properly?
NO Determine the cause, and correct the problem before continuing.
'
.
You may prefer to use the Quick Message feature to leave a message for phone B
instead of following the instructions in step d. and e.
is busy. Please leave a message at the tone, enter another extension number, or press zero for
assistance. . ."
Leave a test message for phone B. Hang up phone B.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave
a test message approximately 15−20 seconds in length to ensure a valid message. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
From phone B, call the Octel 200/300 and enter mailbox B. The Octel 200/300 should
respond with: "There is one message for EXTB. Ready."
NO Determine the cause, and correct the problem before continuing.
'
to listen to the test message. Does the message sound clear?
5
NO Determine the cause, and correct the problem before continuing.
'
to erase the message. Press
3
with "One message will be erased. . . "?
NO Determine the cause, and correct the problem before continuing.
'
Press to exit the mailbox. Does the Octel 200/300 respond with
9
"Good-bye. . . "?
NO Determine the cause, and correct the problem before continuing.
'
Hang up phone B.
to exit the mailbox. Does the Octel 200/300 respond
9
PB60019-01