Avaya Octel 200 Installation And Maintenance Manual page 241

12A. MESSAGE WAITING FOR SYSTEMS USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems using MWI.
a.
b. From phone A, call the Octel 200/300.
c.
d. Enter the extension number of phone B. Does Octel 200/300 respond with "Thank you, just a
e.
f.
g. From phone B, call the Octel 200/300 and on to mailbox B. The Octel 200/300 should
h. Listen to the test message.
i.
j.
12B. MESSAGE WAITING FOR SYSTEMS NOT USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems not using MWI.
.
PB60019-01
Make phone B appear busy by taking it off-hook.
Does the Octel 200/300 answer properly?
NO Determine the cause and correct the problem before continuing.
'
.
If the Octel 200/300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the instructions of
step d.
moment..."? the Octel 200/300 should respond with "Extension EXT-B is busy/unavailable.
Please leave a message at the tone, or enter another extension number, or press zero for
assistance."
Leave a test message for phone B.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave
a test message approximately 15-20 seconds in length to ensure a valid message. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
Does the Octel 200/300 light the message waiting indicator on phone B? (It may take several
seconds for the indicator to turn ON.)
NO Determine the cause and correct the problem before continuing.
'
respond with "you have one message. Ready."
Press to erase the message. Press
3
with "One message will be erased?" Press
respond with "Good-bye."
Hang up phone B. Is the message waiting indicator turned OFF?
.
It may take several seconds for the indicator to turn OFF.
NO Determine the cause and correct the problem before continuing.
'
Turn OFF COS Attribute 9 for Test B.
AT&T System 75/Definity G1 Adaptive Integration
to exit the mailbox. the Octel 200/300 should respond
9
to exit the system. The Octel 200/300 should
9
7.2-45
Octel 200/300 S.4.1