Avaya Octel 200 Installation And Maintenance Manual page 862

Message servers

Hide thumbs Also See for Octel 200:

Table of Contents

14−18 Integration Volume

After All Changes Have Been Made For MWI and CPI

Restart. After the changes have been made, exit the

RESTART the system.

Test. TEST to ensure that MWI and/or CPI are operational. Refer to the next section for the testing

Application Delays. Application delays may need to be changed to handle internally covered calls. Call

your technical support center for assistance.

Octel 200/300

System Parameter 180 —

This parameter can be set to 0 or 1:

0 = 7 bits/even parity

1 = 8 bits/no parity

7 bits/even parity is recommended for the MD110

System Parameter 198 —

MU−LAW, 1 = A−LAW)

Modify System Parameter 198 to be meet PBX requirements.

Refer to the Configuration volume, System Parameter chapter, for more

information on System Parameter 198.

SLOTS Table —

Configure all ports that answer calls forwarded to the message server for

AX mode. Ensure that the message server port extensions match the

MD110 extensions; otherwise, call records will not be correctly received.

MX Mode is available with this message server. Refer to the

Configuration volume, Slots Table chapter, for more information.

FOR CHANGES TO TAKE EFFECT, SYSTEM MUST BE RESTARTED

RS−232 INTEGRATED WITH PBX

PCM ENCODING FOR SYSTEM (0 =

ANSWERING MODE

program. The message server prompts

Chapters

Table of Contents