Table of Contents
Advertisement
10.3-42
Integration Volume
b. Listen to the complete company greeting. Press
NO
c.
From phone A, call out and back in on a trunk that auto-terminates to the Octel 200/300. When
the Octel 200/300 answers, let the system time out; do not enter any digits.
d. Does the Octel 200/300 transfer the call to the intercept position that was configured for this
trunk group?
NO
e.
If different intercept positions are defined for each trunk group, repeat steps a. through d. for
each group.
12A. MESSAGE WAITING FOR SYSTEMS USING THE Octel 200/300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication.
a.
Take phone B off-hook so that it appears busy.
b. From phone A, call out and back in on a trunk auto-terminated to the Octel 200/300.
c.
Does the Octel 200/300 answer properly?
NO
d. Call the extension number of phone B. After the duration specified by the PBX System Option
for Call Forwarding Don't Answer Time-out, the Octel 200/300 should respond with "Extension
EXT-B is busy. Please leave a message at the tone, enter another extension number, or press zero
for assistance."
e.
Leave a test message for phone B.
f.
Does the Octel 200/300 light the message waiting indicator on phone B?
NO
g. From phone B, call the Octel 200/300 and enter mailbox B. The Octel 200/300 should respond
with "You have one message. Ready."
h. Listen to the test message. Does the message sound clear?
NO
i.
Press
with "One message will be erased. . . ?" Press
respond with "Good-bye. . . ?"
NO
Octel 200/300
S.4.1
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
.
If the Octel 200/300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the instructions of
step d. and e.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
Determine the cause and correct the problem before continuing.
'
.
It may take several seconds for the indicator to turn ON.
Determine the cause and correct the problem before continuing.
'
to erase the message. Press
3
Determine the cause and correct the problem before continuing.
'
. Do you reach the correct intercept position?
0
to exit the mailbox. Does the Octel 200/300 respond
9
to exit the system. Does the Octel 200/300
9
PB60019-01
Advertisement
Chapters
Table of Contents
