Avaya Octel 200 Installation And Maintenance Manual page 365

INFORMATION T
able
SLOTS T
System Parameters
PB60019-01
able I
NFORMATION
Modify INFORMATION Table Index 25 to YES. This allows selected
direct internal callers to change their personal greetings and turn them
ON/OFF without first entering their mailboxes.
The
SLOTS T
and Integration Cards.
Line Interface Cards.
Integration, all ports can be configured for AX answering mode to
maximize utilization of the Octel 200/300 ports.
CONFIGURATION OF PORTS FOR OUTCALL —
performance and port usage, all Octel 200/300 ports should be
configured for outcall. If this is not possible, the higher numbered ports
should be configured for outcall. For example, in an eight-port system,
ports 3−8 should be configured for outcall.
.
If eight ports or fewer are configured, the Octel 200/300 makes
outcalls when at least 2 ports are idle. If 9−32 ports are
configured, the Octel 200/300 makes outcalls when at least 3
ports are idle. If more than 32 ports are configured, the Octel
200/300 makes outcalls when at least four ports are idle.
Integration Cards. Configure each unit of each integration card, as
needed, for the following:
Card Type
-
Integration Unit Number
-
Integration (message waiting links and/or line appearance for call
-
processing)
Refer to the Configuration volume, Slots Table, for further information
on configuring the
System Parameter 116 — SHOULD INTEGRATION BE
ACTIVATED?
Modify System Parameter 116 to be YES.
System Parameter 117 — RINGBACKS BEFORE ANSWERING
AX PORT
Modify System Parameter 117 to be 5. This gives Octel 200/300 extra
time to receive the call records from the CBX.
.
The Octel 200/300 normally answers the call immediately within
one ring upon receiving a call record from the RIC. This system
Rolm CBX Adaptive Integration
Table Index 25 — QUICK GREETING ACTIVATION
able is used to configure both Line Interface Cards (LICs)
ANSWERING MODE
able.
SLOTS T
8.1-13
— With ROLM Adaptive
To maximize system
Octel 200/300 S.4.1