11 Configuration Changes To Cpi - Avaya Octel 200 Installation And Maintenance Manual

Item Description
1. Mailbox and extension numbers must match.
2. Modify System Parameter 3 (PBX type is System 75).
3. Modify System Parameter 85 to be FDF (reconnect code
after third party disconnect).
4. Modify System Parameter 116 to be YES.
5. Modify System Parameter 117 to be 5 (ringbacks before
answering).
6. Add Attribute 15 to the COS of all mailboxes associated
with extensions that forward to Octel 200/300
7. All ports should be configured in AX mode.
8. Add a COS with Attribute 58 to those ports that do not re-
quire integration.
9. Configure the TRUNK GROUP Table if different require-
ments than for a port. A unique COS should be assigned for
these trunks.
10. For mailboxes requiring Quick Greeting Activation, modify
INFORMATION Table Index 25 to be YES.
11. Configure all Octel 200/300 ports to be YES for outcall.
12. For collocated system, modify System Parameter 130 to
YES.
PB60019-01
Table 7.2-11 Configuration Changes to CPI
AT&T System 75/Definity G1 Adaptive Integration
Command
.M SYS 3
.M SYS 85
.M SYS 116
.M SYS 117
.A COS
.M SLOT
.A COS
.A TRUNK
.M INFO
Index # 25
.M INFO
Index # 25
.M SYS 130
7.2-55
Complete
Octel 200/300 S.4.1