Table of Contents
Advertisement
3. DIRECT INTERNAL CALL TO THE OCTEL 200/300
This test verifies that the Octel 200/300 processes a direct internal call correctly.
a.
From phone B, call the extension number for the Octel 200/300 access (Hunt group pilot
number). Does the Octel 200/300 answer with, "To enter your mailbox press pound. . . "?
NO
b. Enter
4. INTERNAL CALL TO A RING-NO-ANSWER EXTENSION
This test verifies that the Octel 200/300 correctly processes a call forwarded from a
ring-no-answer (RNA) extension.
a.
From phone A, call phone B. Does phone B start to ring?
NO
b. Do not answer phone B. After the number of ringbacks specified for RNA in phone B's coverage
path, does phone B stop ringing?
NO
c.
After phone B stops ringing, does the Octel 200/300 respond with the prompt, "Extension EXTB
is unavailable. Please leave a message at the tone. . . "?
NO
d. Enter
5. INTERNAL CALL TO A BUSY EXTENSION
This test verifies that the Octel 200/300 correctly processes a call forwarded from a busy
extension.
a.
Take phone B off-hook so that it appears busy.
b. From phone A, call phone B. Does the Octel 200/300 answer with the prompt, "Extension EXTB
is unavailable. Please leave a message at the tone. . . "?
NO
c.
Enter
6. INTERNAL CALL — FAIL−SAVE OPERATION FOR ALL PORTS BUSY
This test verifies that calls to the Octel 200/300 redirect to the designated fail-safe position when
the ports are in use.
a.
Verify that System Parameters 45 and 46 are set to NONE.
b. Put the Octel 200/300 ports in the FWD state by entering, at the @ prompt
CD x y z
where x is the slot number, y is the first port, and z is the last port to forward.
PB60019-01
Determine the cause, and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone B.
9
9
Determine the cause and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone A.
9
9
Determine the cause and correct the problem before continuing.
'
to exit from the Octel 200/300. Hang up phone A and phone B.
9
9
AT&T System 75/Definity G1 Adaptive Integration with APIC
12.2-37
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
