Table of Contents
Advertisement
Direct Internal Calls
A caller can access the Octel 200/300 directly to enter a mailbox, send a Quick Message or fax, or make
a network call. For these direct internal calls, the System 85 displays the following:
a = XXXX to A−YYYY
XXXX is the number of the calling extension and YYYY is access extension number. The Octel 200/300
uses the display information to identify the calling extension.
The Octel 200/300 answers the direct internal call with a prompt. The prompt that is played is determined
by the COS assigned to the calling extension's mailbox. The caller then has access t0 Octel 200/300 call
processing and messaging features.
With Called Party Identification, several enhanced mailbox features are available for extensions
associated with single mailboxes. To take advantage of these features, a caller must be calling from the
extension associated with that caller's mailbox. The Octel 200/300 identifies the mailbox associated with
the caller's extension, so the caller may
Press
-
security code is requested.
.
Press
-
with INFORMATION Table Index 25 defined as YES.
Press
-
name recorded for the mailbox associated with the extension.
.
Press
-
mailbox number is entered.
Call a network location by entering the network access code and extension/mailbox number
-
(Networking feature available with Protocol 1 and 3 network connections).
Forwarded Internal Calls
When a caller at one extension calls another extension and the call is forwarded to Octel 200/300, the
System 85 displays the following:
a = XXXX to ZZZZ
XXXX is the number of the calling extension, ZZZZ is the number of the called extension, and R is a
code indicating the reason the call was forwarded.
The Octel 200/300 answers the call, prompts the caller with the status of the extension, and offers
messaging and call processing options. If the caller is calling from an extension that has a valid mailbox
PB60019-01
to enter the their own mailbox without entering the mailbox number. The mailbox
# #
When calling from any extension, a caller can enter his/her own mailbox by pressing
followed by the caller's mailbox number and security code.
to turn ON/OFF or change the mailbox's personal greeting. Available only to mailboxes
0
to send a Quick Message. When the Octel 200/300 plays the message, it is preceded by the
*
If a caller sends a Quick Message from a phone other than his/her own, the message is
preceded by the name recorded for that phone's mailbox.
to send a fax. If Fax Mail Plust is configured, after pressing
* *
AT&T System 85/Definity G2 Adaptive Integration 12.3-5
* *
once
#
, the receiving
R
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
