Avaya Octel 200 Installation And Maintenance Manual page 234

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

7.2-38
Integration Volume
Internal Call Forwarded on Send All Calls to Coverage
j.
k. Using phone A, call phone B. Press the Inspect Mode key to look at the displays of the ringing
l.
Internal Call Forwarded on Forward All Calls
m. Set phone B to forward all calls to the Octel 200/300 hunt group.
n. Using phone A, call phone B. Press the Inspect Mode key to look at the displays of the ringing
o. Hang up phone A, and cancel the Send All Calls feature on phone B.
12. CALLS TO THE INTERCEPT EXTENSION (ATTENDANT) (New installation only)
This test verifies that each Octel 200/300 port extension can transfer a call to the intercept
extension (attendant).
a.
b. Connect phone B to the jack position of the modular adapter that is associated with port 1 of
c.
d. Answer phone B, perform a hookswitch flash, and press
e.
f.
The System 75 testing is now complete. Proceed with installation of the ATTIC board.
Octel 200/300
S.4.1
Set phone B to send all calls to coverage.
line on the digital phone. The second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
Hang up phone A and cancel the Send All Calls feature on phone B.
line on the digital phone. The second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
a = Test1 EXT−T1
Connect the analog adapter to the 25-pin cable associated with slot 1.
the Octel 200/300.
From phone A, call the extension number of phone B.
number). Hang up phone B.
Does phone A get connected to the attendant?
NO '
Determine the cause and correct the problem before continuing.
Connect phone B to the jack position of the modular adapter of the next Octel 200/300 port
extension. Repeat steps b. through d. until every Octel 200/300 port has successfully
transferred a call to the attendant.
s
r
(or the attendant's extension
0
PB60019-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents