Octel 200/300 Requirements; Rolm Requirements - Avaya Octel 200 Installation And Maintenance Manual

8.1-34 Integration Volume
8.1.8 INSTALLATION CHECKLIST
This section offers a checklist of issues relating to the Octel 200/300 and to the CBX. The list is
presented in the order in which the installation process should be followed. For details regarding any
topic, refer to the sections of this chapter.
Pre-Installation
Item Description
1. List the database. Highlight areas where changes are
required.
2. Make note of the following definitions for each port
Number of ports
-
Port extension number
-
3. If different company greetings will be used, enter the
access code for each route into the
able. Obtain access code numbers from ROLM vendor.
T
4. Set the ring cycle before forwarding to be one less than
the ring cycle in the CBX.
Item Description
1. List CBX database and highlight areas where changes are required.
2. Verify that the S/W release is 8002 or higher for 8000 systems and the S/W
release is 9002 or higher for 9000 systems.
3. Verify that the CBX has the required ROLM link channels available.
4. Verify that the CBX has the MSG CTR feature.
Octel 200/300 S.4.1
Table 8.1-3 Octel 200/300 Requirements
TRUNK GROUP
Table 8.1-4 ROLM Requirements
Command Complete
.L ALL
.L SLOT
.A TRUNK
.M INFO
Index #7
Complete
PB60019-01