Avaya Octel 200 Installation And Maintenance Manual page 789

The following describes how to set up the PBX configuration required for Adaptive Integration using the
SMT (System Management Terminal). Each section describes the field definitions required for a
particular operation. The following is based on R2V3 System 85 SMT commands and may vary slightly
in different releases.
The SMT (System Management Terminal) is used to configure the System 85. Changes made to the
configuration are made by procedures referred to as PROCS. System 85 configurations are commonly
referred to as translations. When possible, the relevant SMT PROCS are listed below.
To Define the COS for the Octel 200/300 Ports
PROC 010,word 1
Field
1
2
3
4
5
6
7
8
9
10
11-12
13
14
15
16
17-18
19
20
21
22
23
PROC 010, word 2
Field
1
2
3
4
5
PB60019-01
AT&T System 85/Definity G2 SMT Configuration Descriptions with APIC
Name
1
Not Used
Automatic Callback
Busy/Rna Call Fwding
Follow Me Fwding
Call Hold
Calling Number Display
Priority Calling
Call Waiting
Override
Call Park/Paging
Conference/Transfer
Touch Tone
Timed Recall
Not Used
ACD Que Display
Is Acd Member
Stop Hunt
Acd Agent Override
Name
COS number
Originate LWC
Receive LWC
Off net Fwding
SMDR Acct code
Set To Meaning
Not used
0 (Disabled)
0 (Disabled)
1 (Enabled)
1 (Enabled)
1 (Enabled)
1 (Enabled)
0 (Disabled)
0 (Disabled)
Not used
0 (Disabled)
1 (Enabled)
1 (Enabled)
0 (Disabled)
Not used
N Disabled
1 (Yes)
1 (Enabled)
0 (Disabled)
0 (Disabled)
Set To Meaning
COS for the Octel
200/300 ports
1 (Enabled)
0 (Disabled)
0 (Disabled)
0 (Account code
not required)
12.3A-3
Octel 200/300 S.4.1