10.3-32
Integration Volume
If the display does not contain this information, determine the cause and correct the problem
before continuing.
e.
Press the display feature button on the Superset 4. The display should now contain:
DISPLAY...
If the display does not contain this information, determine the cause and correct the problem
before continuing.
f.
Now press the Superset 4 prime line key. The display should contain this information:
CALLER:
YYY is the extension number of phone A.
If the display does not contain this information, determine the cause and correct the problem
before continuing.
g. Press the EXIT softkey on the Superset 4 (this should appear as softkey 1). The time and date
should return to the display. Hang up phone A.
External Call Forwarded on Ring-No-Answer
h. Reconfigure the test trunk line to ring directly into the extension of phone B.
i.
Using phone A, call out of the PBX and back in on the test trunk. Does phone B ring?
j.
Let phone B ring until the call forwards to the Superset 4.
k. Look at the Superset 4 display. The display should contain this information:
CFNA:
XXX is the extension of phone B.
If the display does not contain this information, determine the cause and correct the problem
before continuing.
l.
Press the display feature button on the Superset 4. The display should now contain this
information:
DISPLAY...
If the display does not contain this information, determine the cause and correct the problem
before continuing.
m. Now press the Superset 4 prime line key. The display should contain this information:
CALLER:
XXX is the trunk number.
If the display does not contain this information, determine the cause and correct the problem
before continuing.
n. Press the EXIT softkey on the Superset 4. Hang up phone A.
Octel 200/300
S.4.1
YYY
NO
Determine the cause and correct the problem before continuing.
'
XXX
TXXX
PB60019-01