Avaya Octel 200 Installation And Maintenance Manual page 233

e.
f.
g. Look at the display of the digital phone. The second line of the display should contain this
11. DISPLAY TEST FOR FORWARDED CALLS
This test verifies that ATTIC Links receive the proper display information from the System 75
for various types of forwarded calls.
Call forwarded on busy
a.
b. Connect one digital phone to the jack position of the adapter that corresponds to Integration
c.
d. Using phone A, call the extension of phone B.
e.
f.
Call forwarded on RNA
g. Using phone A, call phone B. Let phone B ring until the call forwards to the Octel 200/300
h. Press the Inspect Mode key to look at the displays of the ringing line on the digital phone. The
i.
PB60019-01
Hang up phone A.
Using phone A, call into the ATTIC hunt group directly.
information:
a = Test AXXX
Connect the 356A adapter to the 25-pair cable associated with the configured slot.
Unit 1, Link 1 and connect the second digital phone to the jack position that corresponds to
Integration Unit 1, Link 2.
Take phone B off-hook to make it appear busy.
Press the Inspect Mode key to look at the displays of the ringing line on the digital phone. The
second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
Hang up phone A and phone B.
hunt group.
second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
Hang up phone A.
AT&T System 75/Definity G1 Adaptive Integration 7.2-37
XXX
B
d
Octel 200/300 S.4.1