Table of Contents
Advertisement
6-38
Integration Volume
Item
Description
1.
Forward ports.
2.
Plug the card into the slot that is configured for integra-
tion. Refer to the SLIC Board Installation section, and
monitor the LEDs.
3.
Plug the 25-pair cable into the SLIC connector. Refer to
the SLIC Board Installation section, and monitor the
LEDs.
Item
Description
1.
Change the "Customer Data Block". Turn ON/OFF the following
features:
Include Display Allowed (IDP)
-
Message Center Allowed (MCI)
-
Forward RNA non-DID calls
-
Forward DID calls
-
System Ring Cycle — Regular
-
System Ring Cycle — Distinctive
-
Octel 200/300
S.4.1
Table 6-8 Installing the SLIC Board
Table 6-9 SL-1 Configuration
Command
@ TE C 1
(OPT command)
(OPT command)
(FNAD command)
Optional by Customer
(FNAD command)
Optional by Customer
(CFNA command)
Optional by Customer
(DFNA command)
Optional by Customer
Complete
Complete
PB60019-01
Advertisement
Chapters
Table of Contents
