Avaya Octel 200 Installation And Maintenance Manual page 183

.
f. Does the Octel 200/300 light the message waiting indicator on phone B? (It may take several
seconds for the indicator to turn ON.)
NO
g. From phone B, call the Octel 200/300 and on to mailbox B. The Octel 200/300 should respond
with "you have one message. Ready."
h. Listen to the test message.
i. Press
with "One message will be erased?" Press
respond with "Good-bye."
j. Hang up phone B. Is the message waiting indicator turned OFF?
.
NO
12B. MESSAGE WAITING FOR SYSTEMS NOT USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems not using MWI.
.
a. Make phone B appear busy by taking it off-hook.
b. From phone A, call the Octel 200/300.
c. Does the Octel 200/300 answer properly?
NO
.
d. Enter the extension number of phone B. The Octel 200/300 should respond, "Extension EXT-B is
busy. Please leave a message at the tone, or enter another extension number, or press zero for
assistance."
e. Leave a test message for phone B. Hang up phone B.
.
PB60019-01
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave a
test message approximately 15-20 seconds in length to ensure a valid message. The mailbox
for phone B must be entered in the USER Table or does not offer to take a message.
Determine the cause and correct the problem before continuing.
'
to erase the message. Press
3
It may take several seconds for the indicator to turn OFF.
Determine the cause and correct the problem before continuing.
'
Turn OFF COS Attribute 9 for Test B.
Determine the cause and correct the problem before continuing.
'
If the Octel 200/300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the instructions of
step d. and step e.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave a
test message approximately 15-20 seconds in length to ensure a valid message. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
DEFINITY G3 Adaptive Integration
to exit the mailbox. The Octel 200/300 should respond
9
to exit the system. The Octel 200/300 should
9
7.1-45
Octel 200/300 S.4.1