Avaya Octel 200 Installation And Maintenance Manual page 591

For information on hardware errors regarding integrated systems, refer to the Installation and
Maintenance volume — System Errors and Traffic Pegs.
PB60019-01
LINK DEPENDENT PEGS. The following link dependent pegs are listed
by the LIST INTEGRATION command. Each link has its own pegs.
PEG NAME
1 DEAD ERROR
2 INIT PROC ERROR
3 VCU CTRL ERROR
4 GLARE COUNT
5 MSG WT ERROR
6 SOURCE ERROR
7 DEST ERROR
9 MSG WT NOT
CONFIGURED
10 RESEND ERROR
11 CP MW ERROR
12 DISPLAY ERROR
13 ANSWER ERROR
15 DOWN ERROR
16 INT ERROR
Mitel SX-2000 Adaptive Integration
DESCRIPTION
Number of times the MIC link was dead.
Number of times the MIC link had to
retry part of its initialization procedure.
Number of times the MIC link's call
processing routine saw an unexpected
VCU control event.
Number of times that the Octel 200/300
went off-hook on this port to make an
outcall and the MIC firmware saw a call
come in at the same time.
Number of times the MIC detected an
error while trying to control a message
waiting indicator. This does not include
Message Waiting Not Configured or
Message Waiting Not Able to Make.
Number of times the MIC firmware could
not identify the source of a call.
Number of times the MIC firmware could
not identify the destination of a
forwarded call.
Number of times the MIC made a call to
toggle a message waiting indicator and
could not identify the status of the
indicator.
Number of times the firmware saw no
response to a keypress after a timeout and
had to resend the keypress.
Number of times that a port configured as
a message waiting port received an
incoming call, or a port configured as a
call processing port received a message
waiting request.
Number of times a call rang in with an
unrecognizable display.
Number of times the VCU went off-hook
before the firmware finished reading the
display.
Number of times the MIC link was down.
Miscellaneous firmware error has
occurred.
Octel 200/300
10.3-47
S.4.1