Avaya Octel 200 Installation And Maintenance Manual page 860

14−16 Integration Volume
Octel 200/300 S.4.1
your Ericsson technical support center for assistance with PBX-related
questions.
Reconnect codes "F" must be changed to "2" when the "Universal
Tones" patch is not installed in the MD110 (BSC 5.2 and later).
System Parameter 33 —
PBX INITIALIZE CODE
Modify System Parameter 33 to be NONE.
System Parameter 45 —
SYSTEM−RELOAD FORWARD STRING
Modify System Parameter 45 to be D*21#
System Parameter 46 —
SYSTEM−RELOAD CANCEL−FORWARD
STRING
Modify System Parameter 46 to be E#21#
System Parameter 51 —
RS-232 INTEGRATED WITH PBX
Set this System Parameter to YES.
System Parameter 77 —
PBX PROVIDES MOMENTARY
DISCONNECT
Modify System Parameter 77 to be NO.
System Parameter 83 —
LAMP MW: LIGHT LAMP FOR EACH NEW
MSG
Modify the value of this System Parameter to be YES.
System Parameter 85 —
RECONNECT CODE AFTER 3RD PARTY
HANG−UP
Modify System Parameter 85 to be F
System Parameter 99 —
RINGBACKS BEFORE ANSWERING CX
PORT
Modify System Parameter 99 to be 3
System Parameter 100 —
PORT
Modify System Parameter 100 to be 1
RINGBACKS BEFORE ANSWERING MX
PB60019-01