Table of Contents
Advertisement
Mitel SX-100/SX-200 Analog Adaptive Integration
10.2-15
System Parameter 16 — ALTERNATE TRANSFER INITIATE
CODE
ALTERNATE RECONNECT CODE AFTER NO ANSWER
ALTERNATE RECONNECT CODE AFTER BUSY
ALTERNATE RECONNECT CODE AFTER FAST BUSY
ALTERNATE TRANSFER COMPLETE CODE
Modify the value of Alternate Transfer Initiate Code to be FE. Modify
the value of all Alternate Reconnect Codes to be F, and modify the
value of Alternate Transfer Complete Code to be NONE.
System Parameter 33 — PBX INITIALIZE CODE
Modify the value of System Parameter 33 to be E.
System Parameter 56 — NUMBER OF TRANSFER RETRIES IF
FLASH FAILS
This system parameter must be set to 0 for all systems using Mitel
Integration Cards.
System Parameter 45 — SYSTEM-RELOAD FORWARD STRING
System Parameter 46 — SYSTEM-RELOAD CANCEL-FORWARD
STRING
Superset 4 telephones cannot use DTMF feature access codes to set and
cancel forwarding, so set System Parameters 45 and 46 to NONE. This
causes the Octel 200/300 to take a port off-hook when the port is
forwarded, removing the port from the hunt group. When forwarding is
cancelled, the Octel 200/300 puts the port back on-hook so that it can
answer calls.
System Parameter 77 — PBX SUPPLIES MOMENTARY
DISCONNECT
System Parameter 77 does not need to be modified. When the Mitel
SX-100/SX-200 Analog determines that the caller has hung up, it tells
the Octel 200/300 to hang up the port.
System Parameter 85 — RECONNECT CODE AFTER 3RD
PARTY HUNG UP
Modify the value of System Parameter 85 to be F.
System Parameter 116 — INTEGRATION TYPE
Modify the value of System Parameter 116 to be YES.
System Parameter 117 — RINGBACKS BEFORE ANSWERING
AX PORT
Modify the value of System Parameter 117 to be 5. This gives the Octel
200/300 extra time to receive the displays from the PBX.
PB60019-01
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
