Avaya Octel 200 Installation And Maintenance Manual page 637

YYY
NO
j. Hang up telephone C.
k. From telephone A, call telephone C.
l. After telephone C forwards on ring no answer, press the Display Number Key on the M1
modular telephone set. Does the corresponding LCD turn ON?
NO
m. Press the Port 1 key on the M1 modular telephone. Does telephone B continue to ring?
.
YES
n. Does the display look like this?
YYY XXX "CFNA"
XXX
YYY
NO
o. Hang up telephone A.
p. Cause telephone C to be in the Forward All Calls state to the Octel 200/300 hunt group.
q. From telephone A, call telephone C.
r. Press the Display Number Key on the M1 modular telephone set. Does the corresponding LCD
turn ON?
NO
s. Press the Port 1 key on the M1 modular telephone. Does telephone B continue to ring?
.
YES
t. Does the display look like this?
YYY XXX "FWDA"
u. Hang up telephone A.
v. Repeat the sequence for all links configured with call processing.
PB60019-01
= Telephone A extension source number
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
The M1 modular telephone set should not answer the call.
Determine the cause and correct the problem before continuing.
'
= destination
= source
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
The M1 modular telephone set should not answer the call.
Determine the cause and correct the problem before continuing.
'
Meridian 1 Adaptive Integration
Octel 200/300
11-25
S.4.1