Avaya Octel 200 Installation And Maintenance Manual page 475

PB60019-01
System Parameter 33 — PBX INITIALIZE CODE
Modify the value of System Parameter 33 to be E.
System Parameter 56 — NUMBER OF TRANSFER RETRIES IF
FLASH FAILS
This system parameter must be set to 0 for all systems using Mitel
Integration Cards.
System Parameter 77 — PBX SUPPLIES MOMENTARY
DISCONNECT
System Parameter 77 does not need to be modified. When the Mitel
SX-200 Digital determines that the caller has hung up, it tells the Octel
200/300 to hang up the port.
System Parameter 79 — LAMP MW: "ON" PRE-EXTENSION
DIGITS
System Parameter 81 — LAMP MW: "OFF" PRE-EXTENSION
DIGITS
If the Octel 200/300 is using COV Voice Mail port message waiting
indication, modify both System Parameter 79 and System Parameter 81
to be 00. These parameter values tell the integration software to
perform message waiting indication using the COV Voice Mail feature
instead of the sub-attendant feature. If the Octel 200/300 is using
sub-attendant message waiting indication, modify System Parameter 79
and System Parameter 81 to be NONE.
System Parameter 85 — RECONNECT CODE AFTER 3RD
PARTY HUNG UP
Modify the value of System Parameter 85 to be F.
System Parameter 116 — INTEGRATION TYPE
Modify the value of System Parameter 116 to be YES.
System Parameter 117 — RINGBACKS BEFORE ANSWERING
AX PORT
Modify the value of System Parameter 117 to be 5. This gives the Octel
200/300 extra time to receive the displays from the PBX.
.
The Octel 200/300 normally answers the call immediately within
one ring upon receiving a call record from the MIC. This system
parameter provides for a fail-safe mode of operation. If the Octel
200/300 does not receive call information from the digit display
links, ports answer calls in AX mode and the caller hears the
company greeting.
System Parameter 131 — DEV: SPEAK "DIAL ZERO FOR
ASSISTANCE"
Modify the value of System Parameter 131 to be YES to change the
prompt for a caller transferred to assistance from, "Please wait for
assistance. . ." to "Press zero for assistance. . ."
Mitel SX-200 Digital Adaptive Integration
Octel 200/300
10.1-21
S.4.1