Avaya Octel 200 Installation And Maintenance Manual page 182

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

7.1-44
Integration Volume
d. After a short interval, does the Octel 200/300 respond with, "Extension EXT-B is in use. Please
leave a message at the tone"?
NO
e.
Enter
11. CALLS TO THE INTERCEPT EXTENSION
Verify that the Octel 200/300 can transfer a call to the intercept position (attendant) when the
caller does nothing or presses
a.
From phone A, call outside of the PBX and back in on a trunk that terminates at the Octel
200/300. Does the Octel 200/300 answer properly?
NO
b. Listen to the complete company greeting. Press
NO
c.
From phone A, call out and back in on a trunk auto-terminated to the Octel 200/300. When the
Octel 200/300 answers, let the system time out (do not enter any digits).
d. Does the Octel 200/300 transfer the call to the appropriate intercept position (the one configured
for this trunk group)?
NO
e.
If different intercept positions are defined for each trunk group, repeat steps a. through d. for
each group.
12A. MESSAGE WAITING FOR SYSTEMS USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems using MWI.
a.
Make phone B appear busy by taking it off-hook.
b. From phone A, call the Octel 200/300.
c.
Does the Octel 200/300 answer properly?
NO
.
d. Enter the extension number of phone B. Does the Octel 200/300 respond with "Thank you, just a
moment..."? The Octel 200/300 should respond with "Extension EXT-B is busy/unavailable.
Please leave a message at the tone, or enter another extension number, or press zero for
assistance."
e.
Leave a test message for phone B.
Octel 200/300
S.4.1
Determine the cause and correct the problem before continuing.
'
to exit from the Octel 200/300. Hang up phone A and phone B.
9
9
.
0
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
If the Octel 200/300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the instructions of
step d.
. Do you reach the correct intercept position?
0
PB60019-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents