Table of Contents
Advertisement
Octel 200/300 Configuration Changes
Table 10.3-4 Octel 200/300 Configuration Changes for MWI and CPI
Item
Description
1.
Assign COS Attribute 9 only to mailboxes that will use MWI
to activate message waiting lamps or message waiting dial
tone.
2.
For mailboxes assigned COS Attribute 15, set these index
values to be one ring less than the number of rings for RNA
diversion in the Mitel SX-2000.
3.
Assign COS Attribute 15 only to mailboxes of extensions that
will forward to the Octel 200/300 for call coverage.
4.
Assign INFORMATION Table Index 25 to allow mailbox
owners to quickly change their greetings without first entering
their mailboxes.
5.
Assign COS Attribute 58 to non-integrated ports.
6.
Modify System Parameter 13 as follows:
TRANSFER INITIATE CODE = FE
RECONNECT CODE AFTER NO ANSWER = F
RECONNECT CODE AFTER BUSY = F
RECONNECT CODE AFTER FAST BUSY = F
TRANSFER COMPETE CODE = NONE
7.
Modify System Parameter 16 as follows:
ALTERNATE TRANSFER INITIATE CODE
ALTERNATE RECONNECT CODE AFTER NO ANSWER
ALTERNATE RECONNECT CODE AFTER BUSY
ALTERNATE RECONNECT CODE AFTER FAST BUSY
ALTERNATE TRANSFER COMPLETE CODE
If alternate transfer codes are required, configure them
according to the specific application.
8.
Modify System Parameter 33 to be NONE.
9.
Modify System Parameter 56 to be 0.
10.
Modify System Parameter 77 to be YES.
11.
Modify System Parameter 79 to be the PBX feature access
code for Message Waiting - Activate.
12.
Modify System Parameter 80 to be E.
13.
Modify System Parameter 81 to be the PBX feature access
code for Message Waiting - Deactivate.
14.
Modify System Parameter 82 to be E.
15.
Modify System Parameter 85 to be F.
PB60019-01
Mitel SX-2000 Adaptive Integration
Command
Complete
.A COS
.M INFO
INDEX 7
INDEX 8
.A COS
.M INFO
.A COS
.M SYS 13
.M SYS 16
.M SYS 33
.M SYS 56
.M SYS 77
.M SYS 79
.M SYS 80
.M SYS 81
.M SYS 82
.M SYS 85
Octel 200/300
10.3-49
S.4.1
Advertisement
Chapters
Table of Contents
