Avaya Octel 200 Installation And Maintenance Manual page 188

7.1-50 Integration Volume
For information on hardware errors regarding integrated systems, refer to the Installation and
Maintenance volume, System Errors and Traffic Pegs chapter, for more information.
Octel 200/300 S.4.1
PEG NAME
8 INSPECT ERROR
9 NO DISPLAY
10 HOLD ERROR
11 DIAL ERROR
12 BAD SOURCE
13 BAD DESTINATION
14 UNDER ERROR
15 LWC ERROR
16 INIT CNT
DESCRIPTION
Number of times the ATTIC pressed
the INSPECT button and the
corresponding LED did not light.
Number of times a call was
processed despite the fact there was
not a valid display.
Number of times the ATTIC pressed
the CONFERENCE button and it did
not put the call to the Octel 200/300
on hold.
Number of times the ATTIC did not
get a port from the message server.
Number of calls processed by the
ATTIC that did not have a
recognizable source.
Number of calls processed by the
ATTIC that did not have a
recognizable destination.
Number of times the SIO chip
reported a buffer underrun.
Number of times the ATTIC pressed
a LWC button but the associated
LED did not light.
Number of times the link has been
initialized.
PB60019-01