Avaya Octel 200 Installation And Maintenance Manual page 31

Message waiting indication can be configured in one of two ways:
All integration links perform message waiting for all mailboxes without regard to COS.
-
One or more COSs with specific groups of mailboxes are assigned to each link performing message
-
waiting.
System Parameter 170 — INTEGRATION ON/OFF LINK MUST MATCH, is set to YES when a
COS is assigned to specific links for message waiting.
One link can be specified as the default. This link is used for MWI for any COS not specifically
assigned to another link. Refer to the Configuration volume, Slots Table chapter, for more
information.
To assist in configuring integration links for message waiting, the round trip log can be checked for the
number of mailboxes per link and the longest message waiting round trip time since the report was last
cleared. The term "round trip" refers to the way in which each link scans the USER Table to see if
message waiting lamps need to be turned ON or turned OFF.
The maintenance command L RT 1 is used to collect the round trip information for each integration
link. One round trip indicates a scan of the USER Table starting from the first mailbox to the last
mailboxes for lamp message waiting activity.
@L RT 1
FRI 01/11
integration slot 9 unit 1
number users assigned
Longest msg waiting round trip time
Total num of on commands
Total num of off commands
Current msg waiting time
Current user number (hex)
Num of on commands
Num of off commands
Integration Slot x Unit
Number of Users
Assigned
Longest msg waiting
round trip time
Total num of on
commands
Total num of off
commands
Current msg waiting time
Current user number
(hex)
PB60019-01
15:53:46 1997 Name
This specifies the integration slot number and unit numbering being
listed.
Lists the number of mailboxes assigned to each link. If the links are not
configured by COS, the number here lists all mailbox holders that are
configured for MWI.
Longest round trip time in seconds.
Number of ON commands in the longest round trip.
Number of OFF commands in the longest round trip.
Start time for the current round trip.
This is a hexadecimal mailbox number for the current mailbox being
looked at.
ID:xxx SN:xxxxxxxx
link 1 link 2 link 3
00200 0050
00060 00040 00000
00015 00015 00000
00010 00012 00000
00001 00001 00000
009D 011D
00015 00008 00000
00010 00009 00000
Adaptive Integration
PBX xx
link 4
00000
00000
00000
00000
0000 0000
00000
00000
Octel 200/300 S.4.1
2-7