Table of Contents
Advertisement
e.
f.
g. From telephone A, enter the extension number associated with telephone C. The Octel
h. Does telephone C ring?
i.
j.
k. From the terminal, enter the PS command and verify the port state is IDL.
l.
m. Repeat the procedure from step c. for all ports until all ports are busied out. Verify that calls
n. From telephone A, call out and back in on a trunk dedicated to the hunt group.
o. Does the call overflow to the correct destination?
p. Remove the busy condition from all the Octel 200/300 port extensions by entering at the @
q. Repeat steps c. through m. Substitute calling a station that answers with calling a station that
PB60019-01
From the terminal, enter the PS command.
Does the port that answered show WFD state?
NO
Determine the cause and correct the problem before continuing.
'
200/300 should respond with, "Thank you. Just a moment."
NO
Determine the cause and correct the problem before continuing.
'
Enter the PS command. Port status should show port 1 in the AIC (Assisted Incoming
Call/Automated Attendant) state.
Answer telephone C before it forwards on no-answer. Does the Octel 200/300 transfer the
incoming trunk to telephone C?
NO
Determine the cause and correct the problem before continuing.
'
Busy out the port that answered by entering at the @ prompt
TE C 1 x
Enter
where x is the port that just processed the call.
can be placed through the Octel 200/300 from each port.
NO
Determine the cause and correct the problem before continuing.
'
prompt
TE C 2
Enter
does not answer. Then, repeat by calling a busy station.
Northern Telecom SL-1 Adaptive Integration
Octel 200/300
6-27
S.4.1
Advertisement
Chapters
Table of Contents
