Table of Contents
Advertisement
c.
Press
.
For the hunt group configuration, each port can be called directly. For the ACD configuration,
make as many calls as there are ports. Each port should receive one call.
3. DIRECT INTERNAL CALL TO THE Octel 200/300
Use this test to verify that the Octel 200/300 processes a direct internal call correctly.
a.
From phone A, call the extension number for Octel 200/300 access (Hunt group pilot number). Does
the Octel 200/300 answer with "To enter your mailbox press pound. . . "?
NO
b. Enter
4. INTERNAL CALL TO A RING-NO-ANSWER EXTENSION
Use this test to verify that the Octel 200/300 correctly processes a call forwarded from a
ring-no-answer (RNA) extension.
a.
From phone A, call phone B. Does phone B start to ring?
NO
b. Do not answer phone B. After the number of ringbacks specified for RNA in phone B's coverage
path, does phone B stop ringing?
NO
c.
After phone B stops ringing, does the Octel 200/300 respond with the prompt, "Extension EXTB
doesn't answer. Please leave a message at the tone. . . "?
NO
d. Enter
5. INTERNAL CALL TO A BUSY EXTENSION
Use this test to verify that the Octel 200/300 correctly processes a call forwarded from a busy
extension.
a.
Take phone B off-hook so that it appears busy.
b. From phone A, call phone B. Does the Octel 200/300 answer with the prompt "Extension EXTB
doesn't answer. Please leave a message at the tone. . . "?
NO
c.
Enter
6. EXTERNAL TRUNK CALL TO THE Octel 200/300
Use this test to verify that the Octel 200/300 correctly processes calls from trunks that have been
autoterminated to the Octel 200/300 hunt group. Make sure to test all such trunk groups.
.
1-800 (InWATS) lines can be tested individually, even if they are bands from other areas, by using
planned test numbers. Get these numbers from the CO if you do not already know them.
PB60019-01
from phone A and hang up.
9
9
Determine the cause, and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone A.
9
9
Determine the cause and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
to exit the Octel 200/300 and hang up phone A.
9
9
Determine the cause and correct the problem before continuing.
'
to exit the Octel 200/300. Hang up phone A and phone B.
9
9
Northern Telecom Adaptive Integration with NPIC
13-29
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
