Table of Contents
Advertisement
12.2-24
Integration Volume
Caution!
Port COS
INFORMATION Table
SLOTS Table
Octel 200/300
S.4.1
Mailbox and extension numbers must match for
message waiting indication to operate correctly.
TRANSFER TO A RINGING
COS Attribute 15 —
EXTENSION
System 75Assign a COS with Attribute 15 to mailboxes of extensions
which the System 75 forwards to the Octel 200/300.
COS Attribute 58 — DO NOT USE THIS PORT FOR
INTEGRATION
Assign this COS attribute to those Octel 200/300 ports used in special
applications that do not require integration. These ports would be
supported by standard line cards rather than the APIC cards.
INFORMATION Table Index 25 — QUICK GREETING
ACTIVATION
Modify Information Table Index 25 to YES to allow selected direct
internal callers to change and turn ON/OFF their personal greetings
without first entering their mailboxes.
The SLOTS Table is used to configure the APIC card.
System 75ANSWERING MODE — With System 75 Adaptive
Integration, configure all ports for AX answering mode to maximize
utilization of the Octel 200/300 ports.
CONFIGURATION OF PORTS FOR OUTCALL — Ports configured
for message waiting are set to NO. The other ports should have outcall
set to YES to handle non-message waiting indication outcalls.
TEST — Test is set to NO. No change is necessary.
COS FOR MW — Each port for MWI must be programmed as
DEFAULT or with a specific COS number. Ports designated to perform
MWI must be set to NO for Outcall.
LSPTAB TABLE — The Default LSPTAB Table is configured for the
APIC.
MASTER CLOCK (SYNC) — One APIC in the message server must
be designated as primary to provide clock synchronization with the
PBX digital card supporting the APIC. When more than one APIC card
PB60019-01
Advertisement
Chapters
Table of Contents
