Table of Contents
Advertisement
8.1-12 Integration Volume
8.1.4 OCTEL 200/300 CONFIGURATION
The system can be configured with message waiting indication and called party identification. The
sections below detail the configuration changes that must be made.
Changes for Message Waiting Indication
To configure the Octel 200/300 with message waiting indication on a CBX, the following configuration
changes must be made through the
Mailbox COS
System Parameters
able
SLOTS T
Changes for Called Party Identification
To configure Octel 200/300 with called party identification on a CBX, the following configuration
changes must be made through the
.
Mailbox and extension numbers must match for called party identification to operate correctly.
Mailbox COS
Octel 200/300
S.4.1
program.
UPDATE
COS Attribute 9
— LAMP OR DISPLAY PHONE MESSAGE WAITING
Assign a COS with Attribute 9 to those mailboxes associated with
phones that should have message waiting indication.
System Parameter 116 —
Modify System Parameter 116 to be YES.
The
able is used to configure both Line Interface Cards (LICs)
SLOTS T
and Integration Cards.
For each integration unit configured with one or more message waiting
links, the following is also configured:
For each integration unit configured with one or more message
waiting links, the following is also configured:
Whether the link is enabled to perform lamp message waiting
-
notification (MWN)
Whether the link is used as the system default link or lamp MWN
-
Specific COS or ranges of COS for which the link is to perform
-
lamp MWN
Refer to the Configuration volume, Slots Table chapter, for further
information on configuring the
program.
UPDATE
COS Attribute 15 — TRANSFER TO A RINGING EXTENSION
Assign a COS with Attribute 15 to mailboxes of extensions that the
CBX forwards to Octel 200/300.
SHOULD INTEGRATION BE ACTIVATED?
able.
SLOTS T
PB60019-01
Advertisement
Chapters
Table of Contents
