10.2.2 Mitel Sx-100/Sx-200 Analog Requirements - Avaya Octel 200 Installation And Maintenance Manual

10.2.2 MITEL SX-100/SX-200 ANALOG REQUIREMENTS

The Mitel SX-100/SX-200 Analog installation requirements are divided into three categories: Hardware,
Software, and Configuration.
Hardware Requirements
The Mitel SX-100/SX-200 Analog hardware interface for the Octel 200/300 with Adaptive Integration
requires Superset 4 telephone lines to interface to the MIC ports.
MIC Port Extensions. The Mitel SX-100/SX-200 Analog must provide a Superset 4 line for each MIC
port in the Octel 200/300.
Cables. One 25-pair cable per slot.
Software Requirements
The following software is required for the Mitel SX-100/SX-200 Analog:
Release:
-
Options Required In Package: None
-
Configuration Requirements
The Mitel SX-100/SX-200 Analog configuration must have two unassigned COS available for use with
Adaptive Integration, one for MWI and one for CPI.
PB60019-01
Generic 217, any revision level
Mitel SX-100/SX-200 Analog Adaptive Integration 10.2-5
Octel 200/300 S.4.1