Table of Contents
Advertisement
The Millennium returns a solid confirmation tone for a valid request and returns a fast busy for an invalid
request.
.
Voice mail access and forwarding codes must be unique and cannot conflict with extension first
digits within the Millennium.
Millennium Flash Time Setting
Programming of the flash timer in the PBX is not the same as System Parameter 9 —
In the Octel 200/300, the value of System Parameter 9 is the actual length of the flash. In the Millennium ,
the flash time value sets the level at which a flash becomes a disconnect. For example, if the PBX is set for
a flash time of 500 ms, then an on-hook condition of 500 ms or longer is seen as a disconnect, and anything
less than 500 ms is seen as a flash.
For correct flash time, the following should be configured in the PBX:
Set the Hold Flash Timer for 700 milliseconds.
-
Set up each trunk group in the PBX to have an intercept.
-
PB60019-01
Cortelco Millennium Adaptive Integration 9-9
FLASH TIME (MSEC)
Octel 200/300
.
S.4.1
Advertisement
Chapters
Table of Contents
