Avaya Octel 200 Installation And Maintenance Manual page 777

4. PBX FORWARD ALL CALLS TEST
This test verifies that an extension can forward all calls to the Octel 200/300 access number.
a. Connect the modular adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to port 1.
c. Set phone B to send all calls to coverage.
d. Using phone A, call the extension of phone B. Does phone C start to ring?
NO
e. Look at the displays of ringing lines on the digital phone. The second line of the display should
contain this information:
a = Test A EXTA to Test B EXTB
If the display does not contain this information, determine the cause, and correct the problem
before continuing.
f. Answer phone C. Hang up phone A and phone C.
5. MESSAGE WAITING INDICATOR TEST
(For installations using the Octel 200/300 to control message waiting indicators)
This test verifies that a message waiting indicator can be set and cleared using the LWC feature
codes programmed.
a. Connect the modular adapter to the 25-pair cable associated with the slot that contains ports
configured for lamp message waiting.
b. Connect the digital phone to the first jack position of the adapter that corresponds to the first
port configured for lamp message waiting.
c. Go off-hook and enter the LWC-STORE Feature access code followed by the extension number to
activate MWI for phone B, then hang up phone C. Is phone B's message waiting indicator ON?
NO
d. Go off hook on Line 1 and enter the feature access code and extension number to cancel the
LWC message waiting indication for phone B.
Is phone B's message waiting indicator OFF?
NO
Does the green lamp go on steady?
NO
e. Repeat steps a. through d. for all ports configured.
PB60019-01
Determine the cause, and correct the problem before continuing.
'
Check the feature option, LWC Reception.
'
Check the feature options.
'
Check the feature button assignment.
'
AT&T System 85/Definity G2 Adaptive Integration 12.3-25
r
Octel 200/300 S.4.1