Table of Contents
Advertisement
5. INTERNAL CALL TO A BUSY EXTENSION
This test verifies that the Octel 200/300 correctly processes a call forwarded from a busy
extension.
a.
Take phone C off-hook to make it appear busy.
b. From phone A, call phone C. Does the Octel 200/300 answer with the prompt, "Extension
EXT-C is in use. Please leave a message at the tone."?
NO
.
c.
Enter
6. EXTERNAL TRUNK CALL TO THE OCTEL 200/300
This test verifies that the Octel 200/300 correctly processes calls from trunks that have been
terminated to the Octel 200/300 hunt group. Be sure to test all such trunk groups.
.
a.
From phone A, call outside of the PBX and back in on a trunk that terminates at the Octel
200/300. Does the Octel 200/300 answer with the proper greeting?
NO
b. Enter
c.
Repeat steps a. and b. for each port until all of the ports are busied out. This is to confirm that
calls can be placed to the Octel 200/300 on each port.
7. EXTERNAL CALL TO A RING-NO-ANSWER EXTENSION
This test verifies that the Octel 200/300 correctly processes an external call that reaches a
ring-no-answer (RNA) extension.
a.
From phone A, call outside of the PBX and back in on a trunk that terminates at the Octel
200/300. Does the Octel 200/300 answer properly?
NO
b. Enter the extension of phone C. The Octel 200/300 should respond with "Thank you, just a
moment. . ." Does phone C start ringing?
NO
c.
Do not answer phone C. After the number of rings specified for RNA in phone C's coverage
group, does the Octel 200/300 respond with"Extension EXT-C doesn't answer. Please leave a
message at the tone. . ." ?
NO
d. Enter
PB60019-01
Determine the cause and correct the problem before continuing.
'
If System Parameter 115 is set to Yes, the system answers with the prompt, "Extension
EXT-C is on the phone..."
to exit from the Octel 200/300. Hang up phone A and phone C.
9
9
1-800 (InWATS) lines can be tested individually, even if they are bands from other areas,
by using plant test numbers. Get these numbers from the CO if you do not already know
them.
Determine the cause and correct the problem before continuing.
'
to exit from the system and hang up phone A.
9
9
Determine the cause and correct the problem before continuing.
'
Correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone A.
9
9
AT&T System 85/Definity G2 Adaptive Integration
7.3-37
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
