Avaya Octel 200 Installation And Maintenance Manual page 175

11. DISPLAY TEST FOR FORWARDED CALLS
This test verifies that ATTIC LinksLink 1 receive the proper display information from the
DEFINITY G3i for various types of forwarded calls.
Call forwarded on busy
a. Connect the 356A adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to Integration Unit
1, Link 1 and connect the second digital phone to the jack position that corresponds to
Integration Unit 1, Link 2.
c. Take phone B off-hook to make it appear busy.
d. Using phone A, call the extension of phone B.
e. Press the Inspect Mode key to look at the displays of the ringing line on the digital phone. The
second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
f. Hang up phone A and phone B.
Call forwarded on RNA
g. Using phone A, call phone B. Let phone B ring until the call forwards to the Octel 200/300 hunt
group.
h. Press the Inspect Mode key to look at the displays of the ringing line on the digital phone. The
second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
i. Hang up phone A.
Internal Call Forwarded on Send All Calls to Coverage
j. Set phone B to send all calls to coverage.
k. Using phone A, call phone B. Press the Inspect Mode key to look at the displays of the ringing
line on the digital phone. The second line of the display should contain this information:
a = Test A EXT−A to Test B EXT−B
If the display does not contain this information, determine the cause and correct the problem
before continuing.
l. Hang up phone A and cancel the Send All Calls feature on phone B.
PB60019-01
DEFINITY G3 Adaptive Integration
Octel 200/300
7.1-37
B
d
s
S.4.1