Avaya Octel 200 Installation And Maintenance Manual page 469

Option Number and Name
115 — Attendant − Timed recall (No Answer)
116 — Attendant − Timed Recall (Hold)
117 — Attendant − Timed Recall (Camp-on)
118 — Attendant Automatic Call Forward − No
206 — Call Forwarding − Busy
207 — Call Forwarding − Don't Answer
208 — Call Forwarding − External
209 — Call Forwarding − Follow Me
212 — Can Flash if Talking to an Incoming Trunk
213 — Can Flash if Talking to an Outgoing Trunk
220 — Do Not Disturb
221 — Clear All Features
238 — Override Security
240 — Privacy Disable (Generic 1000, 1001)
240 — Line Privacy (Generic 1002, 1003)
253 — Call Forward − Don't Answer Timer
254 — Call Hold Recall Timer
255 — Repeated Camp-on Beeps Timer
256 — UCD Music on Hold Timer
312 — Paging Default
229 — COV Voice Mail Port
604 — SuperSet 4 Immediate Line Select (1003 and earlier)
Assign this class of service option to the call processing port only if not using the COV Voice Mail port
message waiting indication.
Assign these options according to Octel 200/300 requirements for inter-trunk connections.
313 — CO Trunk to CO Trunk Connect
314 — CO Trunk to TIE Trunk Connect
315 — CO Trunk to DID Trunk Connect
316 — TIE Trunk to TIE Trunk Connect
317 — TIE Trunk to DID Trunk Connect
318 — DID Trunk to DID Trunk Connect
319 — Extension Non-CO Trunk to Trunk Connect
All other COS options must be disabled.
4. Using CDE form 09, STATION/SUPERSET TELEPHONES, configure each MIC Superset
extension. Program each extension's entries as follows:
TEN — The tenant number should be the same as the tenant number for all extensions using the
Octel 200/300. If multiple tenants will be calling the Octel 200/300, use a tenant number to which
each of the tenants has access. Tenant interconnections are configured in CDE form 05, TENANT
INTERCONNECTION Table.
PB60019-01
Answer Timer
Auto Outgoing Line Enable (1004 and later)
Mitel SX-200 Digital Adaptive Integration
Setting
30 seconds
30 seconds
30 seconds
30 seconds
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
DISABLED
ENABLED
6 seconds
3 minutes
15 minutes
5 minutes
0
ENABLED
ENABLED
Octel 200/300
10.1-15
S.4.1