Table of Contents
Advertisement
10A. MESSAGE WAITING FOR SYSTEMS USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication.
a.
Set phone B to forward to the Octel 200/300 on a busy condition by entering the feature access
code for Call Forwarding - Busy followed by the Octel 200/300 access number. After setting
forwarding for phone B, leave phone B off-hook so that it appears busy.
b. From phone A, call out and back in on a trunk auto-terminated to the Octel 200/300.
c.
Does the Octel 200/300 answer properly?
NO
.
d. Enter the extension number of phone B. After the duration specified by the PBX System Option
for Call Forwarding Don't Answer Time-out, the Octel 200/300 should respond with "Extension
EXT-B is busy/unavailable. Please leave a message at the tone, enter another extension number,
or press zero for assistance. . ."
e.
Leave a test message for phone B.
.
f.
Does the Octel 200/300 light the message waiting indicator on phone B?
NO
.
g. From phone B, call the Octel 200/300 and enter mailbox B. The Octel 200/300 should respond
with "You have one message. Ready. . ."
h. Listen to the test message. Does the message sound clear?
NO
i.
Press
with "One message will be erased. . . "? Press
respond with "Good-bye. . . "?
NO
j.
Hang up phone B. Is the message waiting indicator turned OFF?
NO
.
PB60019-01
Determine the cause and correct the problem before continuing.
'
You may prefer to use the Quick Message feature to leave a message for phone B instead
of following the instructions of steps d. and e.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
Determine the cause and correct the problem before continuing.
'
It may take several seconds for the indicator to turn ON.
Determine the cause and correct the problem before continuing.
'
to erase the message. Press
3
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
It may take several seconds for the indicator to turn OFF.
Mitel SX-100/SX-200 Analog Adaptive Integration
to exit the mailbox. Does the Octel 200/300 respond
9
to exit the system. Does the Octel 200/300
9
10.2-31
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
