Avaya Octel 200 Installation And Maintenance Manual page 739

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

1. PRELIMINARY DIGITAL EXTENSION TEST
This test verifies that dial tone is present on each of the extensions used for the APIC ports.
.
The 25-pair cables should be disconnected from the back of the Octel 200/300.
a.
Connect the modular adapter to the 25-pair cable associated with the configured slot.
b. Connect a digital telephone (phone C) to the first jack position of the adapter.
.
c.
Go off-hook. Is a dial tone present?
NO
d. Press the NORMAL button on the 7407D display phone; verify that the green lamp next to the
NORMAL button is ON.
e.
Press the first line appearance button and verify that the red and green lamp next to the appearance is
on steady.
NO
f.
From phone A, call the extension for the first APIC port. Does phone C ring?
NO
NO
g. Look at the display of the digital phone. The second line of the display should contain this
information:
a = Test A EXTA
h. Repeat steps a. through g. for each of the APIC ports.
2. PBX BUSY FORWARD TEST
This test verifies that a call to a busy extension forwards to the access number.
a.
Connect the modular adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to port 1.
c.
From phone A, call the extension number of phone B. Does phone C ring immediately?
NO
PB60019-01
All 12 jack positions of the modular adapter are used per cable.
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing. Check the line
'
appearance in the PBX.
Determine the cause, and correct the problem before continuing. Check the PBX
'
configuration for the extension associated with the phone number.
Is the green lamp associated with Line 1 of the digital phone flashing?
Check the button assignments. The call appearance should be assigned to buttons 1 and
'
2.
Determine the cause, and correct the problem before continuing.
'
AT&T System 75/Definity G1 Adaptive Integration with APIC
12.2-31
XXX
Octel 200/300
S.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents